
Guide
How to choose a welding table size
Buy the table for the parts you build most, plus room to fixture them. Here is how to size it.
Start with your largest common part
Measure the biggest part you build regularly, not the biggest part you have ever built. Add about 12 in on every side for clamps, squares and stops. A part that is 70 × 30 in needs roughly 94 × 54 in of table, which points to a 94″ × 47″ table if you can work one edge off the table, or a 118″ × 59″ if you can’t.
The common sizes and who uses them
- 39″ × 39″ to 59″ × 39″: small parts, brackets, furniture, training stations and tight shops.
- 79″ × 39″ and 94″ × 47″: the job-shop workhorses. A 94″ × 47″ is close to a 4 × 8 ft footprint and handles most general fabrication.
- 118″ × 59″: about 5 × 10 ft. Trailer frames, chassis sections, gates and structural work.
- 118″ × 79″ and 157″ × 79″: large weldments and production fixtures that stay set up.
Leave room to walk around it
A fixture table works best when you can reach it from every side. Plan at least 36 in of clear floor around the table, more if you load parts with a forklift or crane.
Working height
With standard 27 in (690 mm) legs and an 8 in (200 mm) deep top, the work surface sits about 35 in off the floor, which suits most people standing. Adjustable legs let you change that later.
Check the floor
A 118″ × 59″ top weighs about 2,866 lb before legs and parts, spread over six legs. Ordinary 4 in shop slab handles it, but avoid cracked slabs and floor joints under a leg, and check suspended floors with a professional.
Need help choosing?
Tell us the largest part you build and how many people work at the table, and we’ll recommend a size in your written quote.

Get a written quote
Pick a table and your ZIP. Price, freight, spec sheet and terms come back in one business day.