Written quotes with freight in one business dayRequest a quote
WELDING TABLES 0

Guide

28 mm vs 16 mm fixture systems

Both systems clamp parts to a hole grid. The difference is scale, and the two don’t share accessories.

The short answer

A 28 mm system (holes about 1.1 in across, on a 3.94 in grid) is built for heavy and mid-size fabrication. A 16 mm system (holes about 0.63 in across, on a 1.97 in grid) is built for smaller, lighter and more detailed parts.

When 28 mm makes sense

  • Parts made from heavy plate, tube and structural shapes.
  • Frames, trailers, chassis, structural and equipment work.
  • Jobs where clamping force and rigidity matter more than fine hole spacing.

When 16 mm makes sense

  • Sheet-metal parts, thin tube, small brackets and assemblies.
  • Shops that need many clamping points close together.
  • Lighter accessories that one person moves all day.

They don’t mix

Bolts, clamps and stops are made for one hole size. A 16 mm clamp won’t lock in a 28 mm hole, and a 28 mm bolt won’t fit a 16 mm hole. Pick the system that matches most of your work and build your fixturing around it.

Fixturing from other brands

28 mm accessories from different makers often fit each other, but tolerances vary. If you already own 28 mm fixturing, tell us the brand and part and we’ll confirm fit in writing before you buy.

See the 28 mm tables or browse the fixturing.

More guides

Get a written quote

Pick a table and your ZIP. Price, freight, spec sheet and terms come back in one business day.

Get a quote